1675 HORNBY STREET

Issue date

Jan 23, 2019

Project value

$30K

Project type

Renovation

Building type

Multi Family

Description

High Density Housing / Commercial - Addition / Alteration - Interior and exterior alterations to replace existing glazed entry doors and provide new security gate at the northeast exit in this existing mixed use residential and commercial building on this site. Proposed work includes installation of electronic magnetic locks at the principle entry and installation of new automatic door openers for the residential portions only. Building Review Branch Notes: Proposed electromagnetic locks to comply with Article 3.4.6.16. Acceptable door release hardware for an electromagnetic lock shall be located in close proximity to the exit door and shall be equipped with a) a push button together with a motion sensor or a pressure sensitive pad that will immediately release the locking device, b) a push button that is i) directly connected to the electrical circuit that provides power to the locking device, without any intervening mechanism, ii) embossed with the word “EXIT” on the activation surface in text with dimensions of no less than 25 mm, iii) internally illuminated by a permanent LED type light source, and iv) labeled “DOOR RELEASE” in plain and legible characters, c) an electromagnetic lock that i) will reset automatically, except as provided in (c)(ii), ii) has an automatic reset feature that is not activated for at least 15 seconds, and iii) can only be reset by manual means after the activation of the fire alarm system

Contractor

Pierre Busque DBA: Busque Engineering Ltd

Permit status

Issued

25 other permits on record.