4016 RUPERT STREET

Issue date

Oct 04, 2022

Project value

$700K

Project type

New Build

Building type

Single Family

Description

Low Density Housing - New Building - To construct a 2 and a half storey two-family dwelling with a detached accessory building (garage), at the rear providing 2 parking spaces, having vehicular access from the lane. The entire building, INCLUDING THE ATTACHED GARAGE (if applicable), to be sprinklered to 2x NFPA 13D. Note: This Building Permit will remain in a suspended status until the associated (green) Demolition Permit BP-2022-03112 is completed. Note: This is a 2 and half storey building pursuant to the Zoning and Development By-Law 1. A/C unit proposed at front & rear 2. No bar sink proposed 3. Structural & Geotechnical schedule B:Beerinder Sighu M.Eng P.Eng. (604)-339-0034 4. HPO: PD Moore Homes Inc. "Combustible projections or roof soffits on an exposing building face shall not project to less than .45m from the property line and shall be in compliance with VBBL 2014 9.10.15.5.(9)" Any alterations or conversions to the attached garage (if applicable) to habitable living space shall not be permitted without first obtaining the approval of the Director of Planning and the Chief Building Official. Thermal protection measures and Laneway house design guidelines shall be required to be met prior to the approval of the conversion. Addressing notes: Front Unit 4016 Rupert St - One Family Dwelling (1st - 3rd floor) Back Unit 4014 Rupert St - One Family Dwelling (1st - 3rd floor) ***This permit is issued under the VBBL 2019, with updated energy requirements as per bylaw # 12997 effective Jan 01, 2022.***

Contractor

PD Moore Homes Inc

Permit status

Issued

Applicant

Peggie Yuen DBA: DWG Design Work Group Ltd

73 other permits on record.